Australian Spa Parts - Spa suction & skimmer fittings for spas and spa baths

Many spa suction fittings no longer comply with the current standards requiring specific testing and flow rates to be listed. If you don't see your suction fitting here, this is the likely reason.

For new installations and re-plumbs, the use of approved suctions of the correct flow rate is required. 
A spa pump MUST have a minimum of 2 suction points (or 1 suction and skimmer) each suction having a flow rating equivalent or greater than the pump flow rate. ie combined flow rating of 2 suctions shall be at least double the pumps maximum flow rate.
Some spa suctions have differing flow ratings depending on installation method and components used.
This category will be undergoing continual change as more suctions become approved.
You must check you pump flow rate requirements when determining the correct suction type required. 
Incorrect pump/suction matching may lead to injury or death. 

Any doubts, please contact us before purchasing suction fittings or use a qualified spa technician. 

See further information below :

• A minimum of two functioning suction outlets per pump must be installed. Spa Suction outlets must be installed a minimum of 600mm apart, as measured from suction pipe center to suction pipe center. 
• Dual suction fittings shall be placed in such locations and distances to avoid "dual blockage" by a user. 
• Dual suction fittings shall not be located on seating areas or on the backrest for such seating areas. 
• The maximum system flow rate shall not exceed the flow rating of any listed suction outlet cover installed. In the event of one suction outlet being completely blocked, the remaining suction outlets serving the system shall have a flow rating capable of the full flow of the pump(s). 
• Never use pool or spa if any suction outlet component is damaged, broken, cracked, missing, or not securely attached. 
•Replace damaged, broken, cracked, missing, or not securely attached suction outlet components immediately. 
•Two or more suction outlets per pump should be installed in accordance with latest standards.

Some spa suction fittings are available with vacuum break fittings allowing higher flow ratings - this is due to the vacuum break plumbing which, once the suction becomes blocked, will suck air from the vacuum break line / vent into the suction plumbing causing the pump to cavitate and lose suction, thus allowing a trapped person to be freed.

See our pump flow rate information page to help determine suction outlet flow requirements here



American Products PacFab Hyper Flow Spa Suction Cover - Discontinued NLA

SKU: ap452554ww

Discontinued NLA - no longer legal/safe - Replace with this suction fitting listed here and re-plumb to suit. American Products PacFab Hyper Flow spa suction cover These covers break easily. Replacement is e...

CMP 4" Classic Grey Spa Suction - 423 lpm rated

SKU: cmp25203-001

CMP 4" spa suction Australian approved flow rate of 423 lpm / 112 GPM 100mm diameter cover. 34mm projection 83mm hole size required 2" / 50mm straight slip plumbing socket One centre screw securing cover ...

9 In Stock

$29.30

CMP 5" Classic Grey Spa Suction - 643 lpm rated

SKU: cmp25201-209-000

CMP 5" spa suction Australian approved flow rate of 643 lpm / 170 GPM 126mm diameter cover. 42mm projection 83mm hole size required 2" / 50mm straight slip plumbing socket One centre screw securing cover ...

107 In Stock

$37.51

CMP 5" Graphite Grey Spa Suction - 643 lpm rated

SKU: cmp25201-207-000

CMP 5" spa suction Australian approved flow rate of 643 lpm / 170 GPM 126mm diameter cover. 42mm projection 83mm hole size required 2" / 50mm straight slip plumbing socket One centre screw securing cover ...

4 In Stock

$37.51

CMP 5" Stainless Steel Spa Suction - 651 lpm rated

SKU: cmp25200-202-000

CMP 5" spa suction Australian approved flow rate of 651 lpm / 172 GPM 126mm diameter cover. 34mm projection 83mm hole size required 2" / 50mm straight slip plumbing socket One centre screw securing cover...

2 In Stock

$52.58

CMP Grey Spa Suction - 355 lpm rated

SKU: cmp25205-009

CMP spa suction Australian approved flow rate of 355 lpm / 94 GPM 95mm diameter cover. 24mm projection 58mm hole size required 1.5" / 40mm straight slip plumbing socket or 2" / 50mm spigot One x central sc...

57 In Stock

$22.00

CMP Stainless Steel Spa Suction - 355 lpm rated

SKU: cmp25206-002-000

CMP spa suction Australian approved flow rate of 355 lpm / 94 GPM 90mm diameter cover. 24mm projection 58mm hole size required 1.5" / 40mm straight slip plumbing socket Two x screws securing cover, but on gr...

505 In Stock

$43.56

Davey Aqua select Suction Cover

SKU: d12424

NO LONGER AVAILABLE Davey Aqua select Spa Bath Suction Cover Use S&P ASF523 (white) or ASF523cp (chrome) suction cover to replace - the threaded wall fitting will also require replacement (not just the cover...

Edgetec Flexi-Flange Spa & Spa Bath Suction 192 lpm rated - Grey

SKU: e1300-gr

Edgetec suction Australian approved flow rate of 192lpm NB these same suctions were originally rated much higher and used in portable spas with 2-3hp pumps. It is NOT acceptable/legal to replace this sucti...

4 In Stock

$13.64

Edgetec Flexi-Flange Spa & Spa Bath Suction 192 lpm rated - STARK WHITE

SKU: e1300-wh

Edgetec suction - Australian approved flow rate of 192lpm 100mm diameter cover. Female threaded wall fitting - suits Edgetec suction body only - sold separately. Stark White - original Edgetec white bath pa...

5 In Stock

$13.64

Edgetec Flexi-Flange Spa Bath Suction 192 lpm rated - Chrome

SKU: e1300-ch

DISCONTINUED in chrome - available white or grey. Edgetec spa bath suction face and wall fitting - chrome Face Diameter - 100mm, height off spa bath wall -24mm used on lanark spa baths and others Used in co...

Edgetec SLP (Super Low Profile) Spa Bath Suction - Chrome

SKU: e1320-ch

Edgetec SLP spa bath safety suction cover with threaded wall fitting ​ SLP suction cover tool required for removal/installation. e7052 Chrome is a coating applied through electrolysis to a base material su...

25 In Stock

$26.40

Edgetec SLP (Super Low Profile) Spa Bath Suction - White 192 lpm rated

SKU: e1320-wh

Edgetec SLP spa bath safety suction cover with threaded wall fitting ​SLP suction cover tool required for removal/installation. e7052 ...

$13.64

Out Of Stock

Edgetec Spa Bath Suction Adaptor - Straight 1.5"/40mm

SKU: e1340

60mm hole size required 40mm socket...

9 In Stock

$6.27

Edgetec Spa Bath Suction Tee Body 1.5"/40mm with End Cap

SKU: e1360

Edgetec Spa Bath Suction Tee body Hole size required - 60mm, 40mm/1.5" slip pipe connection...

4 In Stock

$14.03 $14.03

0% OFF

$5.65

flolux flosafe 40mm polished 316 Stainless Steel spa / pool safety suction - 40mm self aligning slip fit - 250lpm rated

SKU: flx002

flolux flosafe 40 - for that premium finish for your in-ground pool or spa. Maximum flow rate of 250 lpm. Can be used to replace any suction rated up to 250 lpm - ensure system flow rate and suctions match. ...

4 In Stock

$128.70

flolux flosafe 50mm polished 316 Stainless Steel spa / pool safety suction - 50mm self aligning slip fit - 280lpm rated

SKU: flx010

flolux flosafe 50 - for that premium finish for your in-ground pool or spa. Maximum flow rate of 280 lpm. Can be used to replace any suction rated up to 280 lpm - ensure system flow rate and suctions match. ...

5 In Stock

$128.70

flolux flosafe 50mm polished 316 Stainless Steel spa / pool safety suction - 50mm Threaded - 280lpm rated

SKU: flx011

flolux flosafe 50 threaded - for that premium finish for your in-ground pool or spa. Maximum flow rate of 280 lpm. Can be used to replace any suction rated up to 280 lpm - ensure system flow rate and suction...

3 In Stock

$128.70

LVJ 2" Suction Assembly - Black - 156 GPM / 590 LPM

SKU: lvjL-3802B

LVJ 2" black safety suction Flow rated to 156GPM / 590 LPM 132mm diameter, 43mm projection. Requires a 84mm hole diameter. 2" socket pipe connection Held with 2 small screws on sides ...

2 In Stock

$33.00

Markon Suction Assembly - Dome Series Super Low profile - Chrome

SKU: mksc0803se2626

Markon Dome series super low profile suction assembly complete - chrome. 91mm OD cover - push click fit suction cover. Approx 8mm projection in from wall of bath at centre of the suction cover. 70mm hole req...

10 In Stock

$55.00

Markon Suction Assembly - Low profile - Chrome - Suits newer Stylus & others

SKU: mksc0503st0726

Markon low profile suction assembly complete - chrome. 100mm OD cover - push click fit suction cover. 70mm hole required. 40mm plumbing Tee body with bung MUST be installed as a pair Chrome is a coating appl...

15 In Stock

$55.00

Markon Suction Assembly - Safe-Flo - Chrome

SKU: mksc0403-K

Markon Safe-Flo suction assembly complete - chrome. 90mm OD cover - push click fit suction cover. Approx 8mm projection in from wall of bath at centre of the suction cover. 70mm hole required. 40mm plum...

8 In Stock

$55.00

Markon Suction Body - 90 Elbow, 40mm Slip

SKU: mkse0226-au

Markon 90 degree elbow Suction Body - incorporates a 9mm barb for vacuum relief plumbing if desired (needs to be drilled out, and a length of tubing run above water level) suits the following chrome suction ...

4 In Stock

$22.00

Markon Suction Body - 90 Elbow, 40mm Slip - SafeFlo

SKU: mkse1426

Markon 90 degree elbow Suction Body suits the following chrome suction cover - sold separately: mksc0403 SafeFlo suction cover used on Decina baths Suits 40mm / 1.5" pipe. Suits 70mm hole in spa bath Built...

8 In Stock

$22.00

Markon Suction Body - Straight 40mm Slip

SKU: mkss0126-au

Markon straight Suction Body - suits the following chrome suction covers - sold separately: mksc0103 2 vane cover mksc0303 2 ring cover Suits 40mm pipe glued into the back. Suits 56mm hole in spa bath...

12 In Stock

$17.60

Markon Suction Body - Tee, 40mm Slip

SKU: mkst0226-au

Markon Tee Suction Body - supplied with 1 x bung to block one port if required - suits the following chrome suction covers - sold separately: mksc0103 2 vane cover mksc0303 2 ring cover Suits 40mm pipe. Sui...

3 In Stock

$22.00

Markon Suction Cover - 2 Vane - Chrome - Suits Stylus & others

SKU: mksc0103

Replaces the original 3 vane version used by Stylus. To remove: Locate the slightly raised bump on the outer lip of the suction cover at the base against the bath. This is the position of the locking arm/la...

74 In Stock

$38.50

Markon Suction Cover only - Chrome - Low profile - Stylus and others

SKU: mksc0503

Markon low profile suction cover - chrome. 100mm OD - push click fit suction cover. Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts are chromed plas...

15 In Stock

$33.00

Markon Suction Cover only - Chrome - SafeFlo - Decina

SKU: mksc0403

Markon SafeFlo spa bath suction cover - chrome. 90mm OD x 8mm high ​ Push click fit suction cover. Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts...

31 In Stock

$33.00

Pentair Max Flow II Spa Suction Cover - Discontinued NLA

SKU: p900175ww

Discontinued / No longer Available - Replace with this suction fitting - listed here and re-plumb to suit. NB - it is a legal/safety requirement to replace the complete fitting - not just the cover. Whe...

S&P Chrome plated ABS Plastic Spa Bath Suction Cover - 40mm socket

SKU: wcasf523cp

S&P Chrome spa bath suction Replaces many spa bath suctions for chrome upgrade - replaces both plastic and metal suction covers with 3 screws from S&P and Onga - 60mm thread OD S&P Supa Suction - CHROME - 5...

8 In Stock

$59.40

S&P Chrome plated ABS Plastic Spa Bath Suction Cover - 47mm OD thread

SKU: wcasf480cp

S&P Chrome spa bath suction Replaces many spa bath suctions for chrome upgrade - replaces both plastic and metal suction covers with 3 screws from S&P and Onga - 40mm thread (approx 48mm OD) S&P Supa Sucti...

112 In Stock

$59.40

S&P Strip Skimmer - White - 168 LPM flow rated

SKU: wcasf080

S&P Spa Strip Skimmer - utilized on a vast number of spas for many years - most popular style used. 40mm plumbing - complete with street elbow 237mm high x 110mm wide x 25mm deep 60mm holesize required in sp...

9 In Stock

$43.01

S&P Supa Suction - 40mm Slip - White 192 lpm rated

SKU: wcasf523

S&P Supa Suction - White with 40mm slip fit. With a low rating for flow of 192 litres per minute, it is likely you will need at least 2 of these to suit your pumps flow rate. 85 x 100mm faceplate OD, 48mm ...

6 In Stock

$23.98

S&P Supa Suction - 40mm thread - White 168 lpm rated

SKU: wcasf480

S&P Supa Suction - White - 40mm BSP thread (47mm OD thread) 85mm x 100mm OD faceplate diameter, cover screws are 50mm apart Threads into 40mm BSP faucet adaptor or elbow fittings, or any other female 40mm BS...

38 In Stock

$21.00

S&P Timber Tub Strip Skimmer - White - 168 LPM flow rated - extended thread

SKU: wcasf080-Tub

S&P Spa / Timber Hot Tub Strip Skimmer - utilized on a vast number of spas for many years - most popular style used. 40mm plumbing connection 237mm high x 110mm wide x 25mm deep 60mm holesize required in s...

9 In Stock

$77.00

Spa Bath Suction Cover Warning Label / Decal

SKU: e11050

Spa bath suction fitting warning label decal - marked with mandatory safety information Oval shape 84mm wide x 52mm high Stick either on the suction fitting or bath adjacent to the suction fitting...

10 In Stock

$1.10

Waterway 10" RETROFIT Ultra Retro Suction Drain - Repair Replacement

SKU: ww640-2140v

Waterway 10" tru flo drain RETROFIT SUCTION / DRAIN COVER ASSEMBLY Suitable for concrete swimming pool installation where a field built sump / drain setup is used. Can be used to replace old or broken suctio...

7 In Stock

$132.00

Waterway 10" Tru Flo Drain Cover / Frame - White

SKU: ww640-1900v

Waterway 10" tru flo drain cover and frame - suitable for concrete swimming pool installation where a field built sump / drain setup is used. Frame embedded in concrete during construction, over sump. 279mm ...

7 In Stock

$93.50

Waterway 2" Socket x 2.5" Spigot 90 Ell Adaptor

SKU: ww642-3700

Waterway 2" Socket x 2.5" spigot 90 degree elbow suction adaptor Can be used with suction fittings or any other application with a 2.5" socket to convert to 2" plumbing pipe...

1 In Stock

$12.10

Waterway 2" threaded 90 degree elbow suction adaptor for 3.5" Suctions

SKU: ww642-4150

Waterway Plastics 90 degree Ell with 2" socket and threaded 3.5" suction adaptor. Screws over the MPT thread on Waterway 3.5" suction fittings. Also suits any other fitting with a 2" male MPT or BSP thread ...

$15.40

Out Of Stock

Waterway 2" threaded 90 degree elbow suction adaptor for 5" Suctions

SKU: ww642-3730

Waterway Plastics 90 degree Ell with 2" socket and threaded 5" suction adaptor. Screws over the MPT thread on Waterway 5" suction fittings. Also fits other brands ...

315 In Stock

$15.40

Waterway 2.5" 90 degree sweep elbow 2.5"S x 2.5"Spg

SKU: ww411-9140

Waterway 2.5" sweep elbow - socket x spigot. Suitable for suction fittings, pump connections, etc to maximise flow ...

14 In Stock

$12.10

Waterway 2.5" Spigot x 2" Socket 90 Ell Vacuum Suction Adaptor Fitting

SKU: ww642-3700v

Waterway 2" socket x 2.5" spigot 90 degree elbow suction adaptor with 3/4" barb for vacuum relief tube connection. Vacuum relief offers greater flow rating and safety for suction fittings....

7 In Stock

$12.10

Waterway 2.5" Spigot x 2" Socket reducing adaptor

SKU: ww642-3680

Waterway 2.5" spigot x 2" / 50mm socket reducing adaptor - can be used with 2.5" Waterway suctions to reduce to 2" plumbing. Also used with 2.5" Waterway Wye when splitting multiple suctions on swim systems...

6 In Stock

$11.00

Waterway 3.5" Ultra Hi-Flo Suction - 605 lpm rated 1.5" Socket

SKU: ww640-3497vp

Waterway 3.5" Ultra Hi-Flo suction - White or Grey Flow rated 605 litres per minute 60mm hole size required, 94mm cover diameter, projection of 52mm into spa. Replaces all suctions with up to 60mm hole in th...

From $33.00

Choose Options
In Stock

Waterway 32" Ultra Strip Drain / Suction - for Fibreglass & Vinyl lined spas & pools - up to 1330 lpm / 352 gpm- grey

SKU: ww640-1307v

Waterway 32" Ultra Strip Drain / Suction - grey for use in fibreglass and vinyl lined pools / spas Wall mounted - flow rated at 1120 lpm with two ports Floor mounted - flow rated at 1330 lpm with two ports ...

1 In Stock

$572.00

Waterway 32" Ultra Strip Drain / Suction - for Field Built Sump - up to 1330 lpm / 352 gpm - white

SKU: ww640-1330v

Waterway 32" Ultra Strip Drain / Suction - white for use in concrete pools / spas with field built sumps Wall mounted - flow rated at 1120 lpm with two ports Floor mounted - flow rated at 1330 lpm with two...

1 In Stock

$385.00

Waterway 5" Super Hi-Flo Suction 2" S - Stainless Steel 681 lpm

SKU: ww640-3570sv

Waterway 5" Super Hi-Flo suction fitting with stainless steel cover rated at 681 lpm flow 2" / 50mm Socket....

33 In Stock

$84.70

Waterway 5" Super Ultra Hi-Flo Suction 2"S 848 lpm up to 999 lpm - Dark Silver Grey

SKU: ww640-3949DSGVP

Waterway 5" Super Ultra Hi-Flo suctions made for portable spa applications - MASSIVE flow rating of 999 lpm for portable spa installation. All other installations these suctions still have an extremely high ...

25 In Stock

$58.30

Waterway 6" Ultra Suction 1.5" / 40mm Slip Fit 291 lpm

SKU: ww640-8270v

Waterway 6" Ultra Suction - white, black, or beige - self aligning slip fit design to push inside Australian 40mm pressure pipe. Screw supplied to secure to the wall. Wall mounted only - flow rated at 291 l...

From $88.00

Choose Options
In Stock

Waterway 6" Ultra Suction 2" / 50mm Slip Fit 515 lpm

SKU: ww640-8280v

Waterway 6" Ultra Suction - white, black or beige - self aligning slip fit design to glue inside Australian 50mm pressure pipe. stainless screw included to secure to the wall. Wall mounted only - high flow ...

From $88.00

Choose Options
In Stock

Waterway Designer Series Bath Suction Assembly - Chrome

SKU: ww643-4460-pc-kit

Waterway designer series chrome spa bath suction - low profile. Rated at 454 lpm with vacuum break installed, Rated at 356 lpm without vacuum break installed (capped off) NB at least 2 of these fittings m...

1 In Stock

$27.01

Waterway front Access Spa / Pool Skimmer - white

SKU: ww510-1500

Waterway Weir skimmer for use in fibreglass and concrete spas and pools. Hole size required - 150mm wide x 130mm high. Face dimensions - 195mm wide x 185mm high Supplied with mounting screws or you can bo...

1 In Stock

$220.00

Waterway Hi Flo Suction Fitting with 1.5" 90 Ell Vacuum Break 348 lpm

SKU: ww640-3487v

Waterway Hi Flo suction fitting with 1.5" 90 ell and integral vacuum break. The vacuum break MUST be correctly installed and active to achieve the specified 348 lpm flow rating. Flow rate WITHOUT the vac bre...

From $36.30

Choose Options
In Stock

Waterway Plastics 3.5" Hi Flo Suction 1.5" S - 484 lpm rated - Grey

SKU: ww640-3257v

Grey Waterway spa suction This suction has a 484 litres per minute flow rating. 95mm cover diameter, projection into spa of 27mm. Hole size required through spa is 60mm 1.5" / 40mm socket for plumbing conn...

80 In Stock

$41.25

Waterway Plastics 3.5" Hi Flo Suction 1.5" S - 484 lpm rated - White

SKU: ww640-3250v

This suction has a 484 litres per minute flow rating. 95mm cover diameter, projection into spa of 27mm. Hole size required through spa is 60mm 1.5" / 40mm socket for plumbing connection ...

71 In Stock

$41.25

Waterway Plastics 3.5" Hi Flo Suction 2" S Elbow - 484 lpm rated - White

SKU: ww640-3250v-k

This suction has a 484 litres per minute flow rating. 95mm cover diameter, projection into spa of 27mm. Hole size required through spa is 60mm 2" / 50mm socket elbow for plumbing connection ...

$48.40

Out Of Stock

Waterway Plastics Extended Thread 3.5" Hi Flo Suction 1.5" S Elbow for Timber Hot Tubs - 484 lpm rated - Grey

SKU: ww640-3257v-15-Tub

Suits up to 50mm wall/stave thickness This suction has a 484 litres per minute flow rating. 95mm cover diameter, projection into spa of 27mm. Hole size required through spa is 60mm 1.5" / 40mm socket elbow ...

18 In Stock

$46.20

Waterway Plastics Extended Thread 3.5" Hi Flo Suction 1.5" S Elbow for Timber Hot Tubs - 484 lpm rated - White

SKU: ww640-3250v-15-Tub

Suits up to 50mm wall/stave thickness This suction has a 484 litres per minute flow rating. 95mm cover diameter, projection into spa of 27mm. Hole size required through spa is 60mm 1.5" / 40mm socket elbow ...

43 In Stock

$46.20

Waterway Plastics SPC-3 VP 5" Super Hi Flo Suction 2" S - 950 lpm rated - Grey

SKU: ww640-3787v

This suction has a huge 950 litres per minute flow rating. 130mm cover diameter, projection into spa of 37mm. Hole size required through spa is 84mm 2" / 50mm socket for plumbing connection ...

$58.30

Out Of Stock