Davey Spaquip Spa Power 600 / 601 / 750 / 800 / 1000 / 1200 Heater Tube & Element O-Ring - Oval brass bulkhead style

Davey Spaquip Spa Power plastic heater tube and element o-ring. Suits all models as indicated below ONLY.
Existing element must have large oval shaped brass bulkhead to suit. (newer titanium elements have 2 x small round penetrations only)

To be purchased ONLY when the heater tube is obviously cracked or damaged and the element is 100% intact/not corroded. 
Complete heater assembly replacement is necessary in ALL other cases. 

O-ring NOT sold separately - these do not leak unless element corrosion has occured past the o-ring, or tube is warped out of shape - therefore not sold alone.

If purchased and the problem is not resolved we cannot accept the used tube back into stock for any reason. Be certain its the tube that is at fault. Any doubt - you must purchase the complete heater assembly with element installed.


Suits models:
Spa Power 600 
Spa Power 601 (*pre Sept 2015)
Spa Power 750 (as long as element in the system is pre 2019)
Spa Power 800 (*pre Sept 2015)
Spa Power 1000 (as long as the element in the system is pre 2019 2 & 3kw) 
Spa Power 1000 (ALL 4.5 & 6.0kw)
Spa Power 1200 (4.5kw & 6.0kw)

*Post Sept 2015 heaters are a completely different design with titanium elements and a different tube design.

Does not suit:
Post Sept 2015 SP601, 800, 1200 (3kw) 
Post 2019 replacement titanium elements for SP750 and SP1000 2.0/3.0kw
Hot Spring Solana Spas SP601 systems which have flanged tubes.