Replacement for Onga Invigorator Directional Spa Bath Jet Barrel - White

COMING MID-NOVEMBER

Original Invigorator Jets are discontinued.

This replacement kit converts the existing jet body in the spa to accomodate an alternate available jet face

Kit comprises:
Threaded wall fitting
White directional jet barrel

To fit this kit:
1. Remove original Invigorator jet barrel. 
2. Unscrew the threaded wall fitting inside the bath that screws into the jet body behind the bath - use anything available as a tool such as a flat metal bar to engage the slots in the wall fitting. 
3. clean the surface. 
4. If the jet body pushed away from the spa bath during removal of the wall fitting you will need to silicone seal between the body and spa bath.
5. Add silicone to the rear of the new threaded wall fitting and screw into the jet body hand tight.
6. Clean off excess silicone.
7. Push the new jet barrel into the jet body - you may need to rotate it - it will click into place.