Australian Spa Parts - Waterway Plastics Executive spa pump wet end parts

Waterway Plastics Executive spa jet pump wet end spare parts



2" Spa Pump Union Split Nut - Repair Fitting

SKU: mp0121109020

Magic Plastics 2" pump union split nut repair fitting. 2" FPT thread to suit 2" MPT threaded pumps or fittings. This split nut can be used to replace a broken pump union threaded nut without the need for ...

157 In Stock

$15.40

2.5" Pump Union Split Nut - Repair Fitting

SKU: mp0121109025

Magic Plastics 2.5" pump union split nut repair fitting. 2.5" FPT thread to suit 2.5" MPT threaded pumps or fittings. This split nut can be used to replace a broken pump union threaded nut without the nee...

6 In Stock

$31.90

CMP Pump Union 2" 90 Degree Sweep Ell 2"S

SKU: cmp21003-000

SPECIAL PRICE 2" 90 degree sweep pump union assembly with 2" socket. Maximize flow from the pump instead of 45 and 90 degree bends. Suits all USA 2" threaded pumps including Waterway Executive and Aquaflo XP...

35 In Stock

$16.50

Mechanical Seal - Carbon / Ceramic - 5/8" Cup Seal Type 7

SKU: h6a5cc

5/8" type 7 cup ceramic mechanical seal Suits Waterway Executive and most other Waterway pumps, Spaquip Scorpio, Spa Systems Pirahna jet Pumps, some Finsbury & Waterco Pumps and others Also used in Waterway ...

520 In Stock

$27.50

Mechanical Seal - Silicon Carbide - 5/8" Cup Seal Type 7

SKU: h6a5sc

5/8" type 7 (6A) cup silicon carbide mechanical seal Silicon Carbide primary ring / Silicon Carbide seat seal surfaces with Viton elastomers and stainless steel hardware for superior longevity against abrasi...

47 In Stock

$60.50

Pump 3/8" barbed air bleed plug & o-ring - USA thread - Suits Aquaflo, Waterway, post 2022 LX, and others

SKU: bleed-k

Spa pump bleed nipple and o-ring 1/4" MPT thread (13mm OD) Suits : Aquaflo XP series Waterway Plastics Executive USA LX WUA series AU LX LP & WP series pumps post 2022 Threaded - screws into face of pump...

111 In Stock

$6.60

Pump Union 2" FTP USA thread

SKU: cmp21023-000-000

CMP 2" USA FTP thread Fits the following pumps Aquaflo XP & XP2, Waterway Executive, Balboa Super WOW and Vico, LX LP and WP, Davey QB AUS, Spanet XS-30 2" / 50mm socket Gasket - unique 'T' shaped gask...

47 In Stock

$11.00

Waterway & Aquaflo 56 Frame Pump Motor Mount Screw - #10-32 UNF x 5/8" - 4 Pack

SKU: ww819-0023-4

4 Pack - Waterway and Aquaflo 56 frame pump motor mount screws (bolts) Approx 15mm / 5/8" long thread, Slot Hex Washer head. 4 x #10-32 UNF x 5/8" Waterway and Aquaflo pumps use 4 of these screws to hold the...

179 In Stock

$8.80

Waterway & Aquaflo Pump Faceplate Screw - SS - #8-32 x 5/8"

SKU: ww819-1110

Stainless steel pump faceplate screw (bolt) for Waterway range of spa pumps (Executive, Hi-Flo, Centre Discharge, Viper, EX2, etc) and also suits Aquaflo spa pumps (XP2, Circ-master, FMHP) Approx 15mm long t...

186 In Stock

$2.31

Waterway 1.5hp (1.1kw) executive pump impeller (3hp USA)

SKU: ww310-4200

Waterway Plastics Executive spa pump impeller - 3hp (1.5hp 60Hz) Original version - usually grey coloured - 10mm vane width x 6 vanes, 115mm diameter. Marked 3hp in suction throat on most but not all. New 20...

4 In Stock

$71.50

Waterway 1.75hp / 2hp executive pump impeller - Southwest Spas / Sierra Spas (4hp USA)

SKU: ww310-4190

The hp rating listed is actual horsepower. Some manufacturers label pumps with BHP (brake Horsepower) In the case of a Southwest Sierra Spa 2hp pump, they are sometimes labelled 4hp. The original design imp...

3 In Stock

$71.50

Waterway 2" union O-Ring

SKU: ww805-0229

Waterway 2" pump union o-ring...

65 In Stock

$6.60

Waterway 2" x 2.5" Pump Buttress Thread Adaptor

SKU: ww415-6010kit

Waterway Executive 2" x 2.5" Pump Buttress Thread Adaptor Use this fitting when replacing older Waterway Executive spa pumps that have a larger 2.5" intake/suction thread than the standard 2" discharge threa...

61 In Stock

$17.60

Waterway 2hp - 2.5hp (1.5-1.8kw) executive pump impeller(5hp USA)

SKU: ww310-4180

Waterway Executive Pump Impeller The hp rating listed is actual horsepower. Some manufacturers label pumps with BHP (brake Horsepower) In the case of a 2hp-2.5hp pump, they are sometimes labelled 5hp. If in...

9 In Stock

$71.50

Waterway 3hp Euro (2.2kw) Executive Pump Impeller

SKU: ww310-2440

Waterway Plastics pump impeller - Suits Waterway Executive 3hp pumps sold on Australian spas such as Heritage, Sapphire, Maax, Lanark and others as well as Waterway Executive Euro 3hp Pumps supplied from USA...

10 In Stock

$71.50

Waterway Executive 2hp & 3hp (4, 5 HP USA) Pump Wear Ring

SKU: ww319-1370

Wear ring for Waterway Executive 2 & 3hp wet end -( impeller may be marked 5hp or 3hp)...

4 In Stock

$11.00

Waterway Executive Drain Plug / O-ring Assembly

SKU: ww760-1201

Pump bleed drain plug / o-ring assembly...

$5.50

Out Of Stock

Waterway Executive Pump 1.5hp (1,2,3HP USA) Wear Ring

SKU: ww319-1380

Wear ring for 1.5hp waterway pump (impeller marked as 3hp)...

11 In Stock

$15.40

Waterway Executive pump barbed air bleed plug

SKU: ww715-1261

Waterway Executive spa pump bleed nipple 1/4" MPT thread Also suits Aquaflo XP2 pumps Threaded - screws into face of pump body in place of standard plug. 6mm / 0.25" barb for connection to air bleed syst...

52 In Stock

$5.50

Waterway Executive Pump Body O-ring

SKU: ww805-0261

Main o-ring seal around pump face...

15 In Stock

$11.00

Waterway Executive Pump Faceplate 2" Suction

SKU: ww311-1220

Front pump face with 2" Suction and drain plugs (8 screws hold it on) Does not include o rings or plugs...

6 In Stock

$93.50

Waterway Executive Pump Faceplate 2.5" Suction

SKU: ww311-1210

Front pump face with 2.5" Suction (larger than discharge union) and drain plugs (8 screws hold it on) Does not include o rings or plugs Used on early Waterway Executive pumps and new Southwest Spas / Sierra ...

10 In Stock

$93.50

Waterway Executive Pump Volute

SKU: ww315-1220

IF YOU REQUIRE THIS PRODUCT - WE RECOMMEND YOU PURCHASE COMPLETE WET END INSTEAD (This is due to incompatability issues with new moulding - an older faceplate is too large to fit the newer volutes - no respo...

From $77.00

Choose Options
In Stock

Waterway Executive Pump Wet End Complete 2" intake

SKU: ww310-1750

Complete wet end (all sizes available 56 Frame) To replace - Simply wind impeller onto the motor shaft without dismantling wet end and do up the 4 mounting bolts. 1.75hp / 2hp Southwest/Sierra (4hp USA) wet...

From $264.00

Choose Options
In Stock

Waterway Executive Pump Wet End Complete 2.5" intake

SKU: ww310-1440

Complete wet end Standard 2" discharge, with larger 2.5" suction intake. This wet end has a much larger thread diameter on the suction than the discharge even though 2" pipe suits both sides. To replace - ...

From $192.50

Choose Options
In Stock

Waterway Pump drain barb adaptor 1/4" MPT x 3/8" Barb

SKU: ww672-4350

Pump drain bleed adaptor - 3/8" / 9mm barb...

2 In Stock

$5.50

Waterway Pump Union 2"

SKU: ww400-5571

Standard suction/discharge union on Waterway Executive pumps...

67 In Stock

$11.55

Waterway Pump Union 2" - 45 degree Ell 2"Spg

SKU: ww400-4300

...

18 In Stock

$13.20

Waterway Pump Union 2" 90 Degree Sweep Ell 2"S

SKU: ww400-5800

...

4 In Stock

$14.85

Waterway Pump Union 2.5" Suction with 2" socket tail - suits Executive Pumps

SKU: ww400-5991

Waterway 2.5" pump suction union assembly - 2.5" union nut with 2" socket tail piece If the front suction union nut is larger than the discharge union nut, it will be this type - found on early Waterway Exec...

2 In Stock

$23.10