Australian Spa Parts - Spa pump wet end parts - impeller, mechanical seal, unions, volute, faceplate

Spa pump wet end parts and fittings including complete wet ends, impellers, mechanical seals, wear rings, faceplates, volutes, and screws to suit many makes and models:
Waterway Plastics, Aquaflo XP2 and Circ-Master, Piranha, Xylem ITT Laing Thermotech, Davey Spaquip, SpaNet, Waterco, Trifo and more



Triflo spa bath pump heater assembly pre 2012 - Sensa-Touch only

SKU: e5431

NO LONGER AVAILABLE - contact us for solutions Triflo spa bath pump replacement heater / seal plate assembly - suits Tri-Flo Sensa-Touch models only up to 2012 Used up to approx 2012 Has 5 wires coming fro...

U.S. Sealube - Mechanical Seal Installation Lubricant - 4oz / 118ml Bottle

SKU: sealube4oz

U.S. Sealube is a water based mechanical seal installation lube to enable easy mech seal fitting. Only water based lubricant should be used on mechanical seals. Never use silicon / teflon based or petroleum...

$38.50

Out Of Stock

Waterco Portapac Mk1 Pump Union

SKU: wcs13185A

Waterco Portapac Mk1 pump union also suits Delta Hot Mk1 Cannot be interchanged with newer Mk2, 3 or 4 unions which have a different thread size Nut OD 73mm Thread ID 57mm 40mm pressure pipe socket...

2 In Stock

$40.04

Waterco Portapac Mk2, Mk3 Pump Union

SKU: wc122243B

Waterco Portapac Mk2 + (Mk2, Mk3) pump union also suits Delta Hot Mk2 Cannot be interchanged with older Mk1 unions which have a different thread size Nut OD 80mm Thread ID 63mm 40mm pressure pipe socket...

4 In Stock

$12.32

Waterco Portapac Mk3 Pump Face Body

SKU: wc6381522

Waterco Portapac Mk3 pump body / casing. Used on models 4551403, 45551413 Has a ribbed finish with brass threaded inserts for bolts. Large round hole in top for new style heater element. Cannot be interchang...

1 In Stock

$198.00

Waterway & Aquaflo 56 Frame Pump Motor Mount Screw - #10-32 UNF x 5/8" - 4 Pack

SKU: ww819-0023-4

4 Pack - Waterway and Aquaflo 56 frame pump motor mount screws (bolts) Approx 15mm / 5/8" long thread, Slot Hex Washer head. 4 x #10-32 UNF x 5/8" Waterway and Aquaflo pumps use 4 of these screws to hold the...

179 In Stock

$8.80

Waterway & Aquaflo Pump Faceplate Screw - SS - #8-32 x 5/8"

SKU: ww819-1110

Stainless steel pump faceplate screw (bolt) for Waterway range of spa pumps (Executive, Hi-Flo, Centre Discharge, Viper, EX2, etc) and also suits Aquaflo spa pumps (XP2, Circ-master, FMHP) Approx 15mm long t...

186 In Stock

$2.31

Waterway 1.5hp (1.1kw) executive pump impeller (3hp USA)

SKU: ww310-4200

Waterway Plastics Executive spa pump impeller - 3hp (1.5hp 60Hz) Original version - usually grey coloured - 10mm vane width x 6 vanes, 115mm diameter. Marked 3hp in suction throat on most but not all. New 20...

4 In Stock

$71.50

Waterway 1.75hp / 2hp executive pump impeller - Southwest Spas / Sierra Spas (4hp USA)

SKU: ww310-4190

The hp rating listed is actual horsepower. Some manufacturers label pumps with BHP (brake Horsepower) In the case of a Southwest Sierra Spa 2hp pump, they are sometimes labelled 4hp. The original design imp...

3 In Stock

$71.50

Waterway 2" union O-Ring

SKU: ww805-0229

Waterway 2" pump union o-ring...

65 In Stock

$6.60

Waterway 2" x 2.5" Pump Buttress Thread Adaptor

SKU: ww415-6010kit

Waterway Executive 2" x 2.5" Pump Buttress Thread Adaptor Use this fitting when replacing older Waterway Executive spa pumps that have a larger 2.5" intake/suction thread than the standard 2" discharge threa...

61 In Stock

$17.60

Waterway 2.5" Pump Union Assembly - Suits Waterway Viper Pump

SKU: ww400-6011

Waterway Viper 2.5" pump union assembly Outside diameter of nut is 105mm. Pipe socket - 2.5" USA pipe OD of 73mm 2.5" union nut with 2.5" socket tail piece. Does not suit Waterway Executive pumps which use ...

$33.00

Out Of Stock

Waterway 2hp - 2.5hp (1.5-1.8kw) executive pump impeller(5hp USA)

SKU: ww310-4180

Waterway Executive Pump Impeller The hp rating listed is actual horsepower. Some manufacturers label pumps with BHP (brake Horsepower) In the case of a 2hp-2.5hp pump, they are sometimes labelled 5hp. If in...

9 In Stock

$71.50

Waterway 3hp Euro (2.2kw) Executive Pump Impeller

SKU: ww310-2440

Waterway Plastics pump impeller - Suits Waterway Executive 3hp pumps sold on Australian spas such as Heritage, Sapphire, Maax, Lanark and others as well as Waterway Executive Euro 3hp Pumps supplied from USA...

10 In Stock

$71.50

Waterway Centre Discharge Impeller - 1.5hp (2hp USA)

SKU: ww310-5200

Waterway centre discharge 1.5hp impeller (USA 2hp) 98mm OD, 18.4mm vane width, 5 vanes...

1 In Stock

$66.00

Waterway Executive 2hp & 3hp (4, 5 HP USA) Pump Wear Ring

SKU: ww319-1370

Wear ring for Waterway Executive 2 & 3hp wet end -( impeller may be marked 5hp or 3hp)...

4 In Stock

$11.00

Waterway Executive Drain Plug / O-ring Assembly

SKU: ww760-1201

Pump bleed drain plug / o-ring assembly...

$5.50

Out Of Stock

Waterway Executive Pump 1.5hp (1,2,3HP USA) Wear Ring

SKU: ww319-1380

Wear ring for 1.5hp waterway pump (impeller marked as 3hp)...

11 In Stock

$15.40

Waterway Executive pump barbed air bleed plug

SKU: ww715-1261

Waterway Executive spa pump bleed nipple 1/4" MPT thread Also suits Aquaflo XP2 pumps Threaded - screws into face of pump body in place of standard plug. 6mm / 0.25" barb for connection to air bleed syst...

52 In Stock

$5.50

Waterway Executive Pump Body O-ring

SKU: ww805-0261

Main o-ring seal around pump face...

15 In Stock

$11.00

Waterway Executive Pump Faceplate 2" Suction

SKU: ww311-1220

Front pump face with 2" Suction and drain plugs (8 screws hold it on) Does not include o rings or plugs...

6 In Stock

$93.50

Waterway Executive Pump Faceplate 2.5" Suction

SKU: ww311-1210

Front pump face with 2.5" Suction (larger than discharge union) and drain plugs (8 screws hold it on) Does not include o rings or plugs Used on early Waterway Executive pumps and new Southwest Spas / Sierra ...

10 In Stock

$93.50

Waterway Executive Pump Volute

SKU: ww315-1220

IF YOU REQUIRE THIS PRODUCT - WE RECOMMEND YOU PURCHASE COMPLETE WET END INSTEAD (This is due to incompatability issues with new moulding - an older faceplate is too large to fit the newer volutes - no respo...

From $77.00

Choose Options
In Stock

Waterway Executive Pump Wet End Complete 2" intake

SKU: ww310-1750

Complete wet end (all sizes available 56 Frame) To replace - Simply wind impeller onto the motor shaft without dismantling wet end and do up the 4 mounting bolts. 1.75hp / 2hp Southwest/Sierra (4hp USA) wet...

From $264.00

Choose Options
In Stock

Waterway Executive Pump Wet End Complete 2.5" intake

SKU: ww310-1440

Complete wet end Standard 2" discharge, with larger 2.5" suction intake. This wet end has a much larger thread diameter on the suction than the discharge even though 2" pipe suits both sides. To replace - ...

From $192.50

Choose Options
In Stock

Waterway Hi-Flo Side Discharge 2hp (4hp USA 60Hz) Impeller

SKU: ww310-4050

Waterway Hi Flo 2hp (4hp USA 60hz) impeller 96mm diameter x 6 vanes @ 23mm vane width...

5 In Stock

$66.00

Waterway Pump drain barb adaptor 1/4" MPT x 3/8" Barb

SKU: ww672-4350

Pump drain bleed adaptor - 3/8" / 9mm barb...

2 In Stock

$5.50

Waterway Pump Union 1.5" / 40mm

SKU: ww400-4060

1.5" NPT thread suction/discharge union on USA (and some Chinese made) pumps including: Waterway Iron Might pumps, Xylem ITT Laing E-14 circulation pumps, Aquaflo Circ-Master, Aquaflo FMHP pumps, and others...

271 In Stock

$8.80

Waterway Pump Union 2"

SKU: ww400-5571

Standard suction/discharge union on Waterway Executive pumps...

67 In Stock

$11.55

Waterway Pump Union 2" - 45 degree Ell 2"Spg

SKU: ww400-4300

...

18 In Stock

$13.20

Waterway Pump Union 2" 90 Degree Sweep Ell 2"S

SKU: ww400-5800

...

4 In Stock

$14.85

Waterway Pump Union 2.5" Suction with 2" socket tail - suits Executive Pumps

SKU: ww400-5991

Waterway 2.5" pump suction union assembly - 2.5" union nut with 2" socket tail piece If the front suction union nut is larger than the discharge union nut, it will be this type - found on early Waterway Exec...

2 In Stock

$23.10

Waterway Tiny Might Circulation Pump Wet End

SKU: ww310-9000

Waterway Tiny Might circulation pump wetend complete...

1 In Stock

$82.50

Waterway Viper 2.2kw (5hp) Pump Wetend Complete

SKU: ww310-0180

Waterway Viper pump wetend complete - 2.2kw, (5hp USA) Complete with volute, faceplate, body o-ring, impeller, mechanical seal, and wear ring. Uses a 5/8" standard type 6 seal. O-ring is seated in a groove a...

2 In Stock

$286.00

Waterway Viper Pump Impeller - 5hp

SKU: ww310-2620

Waterway Viper pump impeller 5hp 92mm diameter, 7 x vanes, 19mm vane width Unique design - approx 30 degree pitched front/rear plates creating a concave rear / convex front Mechanical seal to suit is a...

3 In Stock

$101.20

Xylem (ITT Laing Thermotech) E-10 & E-14 Circulation Pump body O-ring seal

SKU: lha00039003

Body O-ring seal to suit Xylem (formerly ITT Laing) E-10 & E-14 circulation pumps only. Does not suit earlier SM959 pumps with square gasket seals or E-10 pumps with metal mounting bases....

$8.00

Out Of Stock

Xylem (ITT Laing Thermotech) E-10 & E-14 Circulation Pump cable entry gland assembly

SKU: lhae10gland

Cable gland / strain relief assembly to suit Xylem (formerly ITT Laing) E-10 and E-14 circulation pumps Consists of a locknut, strain relief, washer and water seal....

44 In Stock

$12.00

Xylem (ITT Laing Thermotech) E-10 circulation pump - Rotor Assembly

SKU: lhb07230009

Xylem (formerly ITT Laing) E-10 rotor assembly - suits E-10 circulation pumps with plastic 'finger style' bases only Does not suit E-10 pumps with metal base plates or any version of SM9xx series pumps Xy...

3 In Stock

$170.50

Xylem (ITT Laing Thermotech) E-14 circulation pump - Rotor Assembly

SKU: lhb07230010

Xylem (formerly ITT Laing) E-14 rotor assembly Xylem E-14 rotor assembly includes the impeller, magnetic section and carbon bearing - this is a one piece unit that cannot be dismantled further. This rotor as...

1 In Stock

$170.50