Australian Spa Parts - spa hot pump replacement spa control systems 4352, portapac, 4395

Spa pool hot pump replacements. 
Options for these kits listed include a pump and:
Gecko Aeware electronic spa control/heater
Ethink KL8800 series electronic spa control system/heater

Designed to replace older all in one 'hot pumps' that were the industry standard from the late 80's right through the 90's and even up uptil 2015, including such pumps as:
onga 4352, 4353, 4395
Finsbury Vortex Elite
Waterco Portapac, Portapac Elite
Davey XSHD200, 250 & 300
Spaquip Pulsar and 2095 series (with separate pump)

These older pumps were typically set up as a 10A system with 1hp pump or a 15A system with a 1.5hp pump. Our kits listed below reflect this.

Heater position - is not restricted to the location as depicted in the images. The heater can go in either suction or return plumbing from the pump in the pipework within reach of the electrical control box. This makes retro-fitting this system easy.
Each kit comes ready to connect to power and is light ready (a spa light fitting/lamp can be added). Only the original air blower is re-used.

In all cases, these kits support the pump supplied plus one existing air blower / second pump (with max load of 6A)
Also supported is ozone and 12v AC lighting
Ethink spa packs also support: 12v AC ozone, 12vDC lighting, Aux output for stereo power supply or bluetooth
Gecko Aeware spa packs also support: smart phone controlled wifi module